Help centre

Every question, answered.

Questions about ordering and shipping, every SEMCO project and every SEMCO product, gathered in one place.

Ordering & support

Payments, shipping, returns and the basics.

Ordering & Payments

What payment methods do you accept?

We accept VISA, MasterCard, American Express, Discover, and PayPal.

Can I change an order I have already placed?

Contact support during business hours as soon as possible. Once an order has shipped we are unable to make changes to it.

Shipping

When will I receive my order?

Orders placed before 8:00am PST on weekdays ship the same day; orders after 8:00am ship the next day, and weekend orders ship the following Monday. Expect delivery within 3 to 5 business days from our Las Vegas warehouse.

What do I do if I never received my order?

First check the tracking with the carrier. If the delivery still cannot be located, email us at info@semcoworks.com and we will help track it down.

What do I do if I received a defective order?

Photograph the defect and email the images to info@semcoworks.com so we can review it for replacement eligibility.

Returns & Refunds

What is the return policy?

You have 30 days from receipt to request a return. Items must be in original condition with intact packaging and proof of purchase. Only unopened liquids can be returned, with a 25% restocking fee; opened packages incur a 40% fee. Special orders and pigmented or color products are non-returnable, and international shipping fees are non-refundable.

How long does a refund take?

Once we receive and inspect the returned item, the refund is initiated immediately. Most credit card providers then take about 5 to 7 business days to post it.

General

How is SEMCO Liquid Membrane different from products like DRYLOK?

It is a flexible, elastomeric liquid-rubber membrane with up to 1300% elongation rather than a rigid masonry sealer, so it moves with the surface and works across wood, metal, tile, fiberglass, and concrete, including submerged use. Rigid masonry waterproofers are generally limited to concrete and block and can crack where the substrate moves.

Are SEMCO products eco-friendly?

Yes. SEMCO products are water-based and low-VOC, and the companion cleaners such as Stone Soap are biodegradable, making them suitable for interior and exterior use with normal ventilation.

Is there a warranty on SEMCO Liquid Membrane?

It carries a 5-year standard limited warranty, extended to 10 years on non-traffic surfaces, when applied correctly over properly prepared surfaces.

By project

Basements, roofs, pools, RVs and more.

Basement Waterproofing

Project page →

My wall is damp right now. Can I apply it?

No, and this is the rule that matters most. The substrate has to be under 3% residual moisture or the coating traps it and stays tacky instead of curing. Dry the wall first. If it never fully dries, apply Natural Shield, let it cure, then coat.

Interior or exterior?

Both work. Exterior is the more durable fix because it stops water before it enters the wall, usually paired with a French drain. But most people can’t excavate, so they seal the interior instead and report the damp stopping. If you have the access, exterior is ideal; if not, interior still delivers.

Do I really need the cleaners?

If you want it to bond, yes. Basement walls carry efflorescence and mineral deposits that stop a coating adhering — that’s what Prep D removes. Skipping prep is the single most common reason a coating lifts.

Can I paint, tile or carpet over it?

Yes, once fully cured. Water-based acrylic paint goes over it fine, tile can be set over it with your usual mortar, and customers have carpeted floors sealed with it. It makes a good base layer for finishing a basement — seal first, then finish.

Does it smell? I have a gas water heater down there.

It’s water-based and low-VOC at 14 g/L, so it’s low odor and one of the few waterproofers people are comfortable using in a closed basement. Reviewers have specifically chosen it to work around a gas water heater. Still ventilate reasonably while you work.

What if I’ve already painted the wall?

Remove anything loose or flaking — the membrane needs sound substrate to bond to. If the old coating is solid and well-adhered, test a small patch first.

How much do I need?

Plan on 200 sq ft per gallon at two coats. Porous block and rough old walls use more, so if you’re between sizes, size up. The coverage calculator on the Basement Waterproofing page works it out for you.

Foundation Waterproofing

Project page →

Outside or inside — which should I seal?

Outside, if you can get to it. That’s the positive side: water never enters the wall at all. Interior sealing works and is often the only practical option, but the wall stays saturated. If you’re already excavating for a drain or a repair, do it while the trench is open.

Do I still need a French drain?

If the soil around your foundation stays saturated, yes. The coating stops water entering the wall; the drain takes it away from the wall. Customers who did both report the problem solved rather than moved.

Will it go over the old tar?

Yes, provided it’s sound. One customer coated over original tar-based waterproofing and reported it adhered and dried well; another went over a ground-smooth epoxy repair. Remove anything loose first.

How wide a crack will it bridge?

Up to ¼" on its own. Wider than that, fill it first and reinforce with fabric. One customer bought filler for a hairline crack and then found he didn’t need it.

Can I use it in a crawl space?

Yes, and it’s a common use. At 14 g/L VOC there’s effectively no fume issue in an enclosed space — one customer chose it specifically so she wouldn’t have to worry about ventilation down there.

When can I backfill?

After the full cure, at least 7 days and longer in humid weather. Wet soil against an uncured film damages it. On ICF, add a dimpled membrane over the cured coating before the fill goes back.

My wall is bowing. Will this fix it?

No. Bowing, shearing or displaced block is structural and needs an engineer. A coating seals a surface — it can’t hold soil back. Get the structure sorted, then seal it.

Is it safe for fish and birds?

Check with SEMCO first: call 1-833-211-2297 before you put fish in or let animals drink from it. It’s water-based and low-VOC at 14 g/L, and customers have used it on koi ponds and birdbaths. Whatever the use, give it the full cure first, at least 7 days and longer in humid weather.

How many coats?

Three for anything submerged, each at 15 to 20 mil. That’s the single most repeated number in these reviews, and it’s why coverage is 100 sq ft per gallon rather than 200.

How long before I can fill it?

At least seven days, and longer if the coats went on thick or the weather is humid. Every owner who reports a failure filled early, and one traced his previous failure with a different product to exactly that.

My fountain has cracks. Will it bridge them?

Hairline cracks, yes — several customers sealed multi-crack concrete fountains with three coats. Anything over ¼" gets Fabric Reinforcement first. A basin that has broken structurally needs repair before coating.

Will it stick to fiberglass?

Yes, once sanded with 60-grit. One customer fixed a crack in a fiberglass fountain he didn’t think was repairable, with three coats.

What about a galvanized tub or an old liner?

Galvanized takes Nu-Lift, which etches the metal. Customers have converted galvanized garden tubs into fish ponds with it, and one sealed a pond that had both rubber liner and stonework — it bonded to both.

Can I use it on an irregular shape a liner won’t fit?

That’s one of its better uses. Two customers built irregular ponds where a bought liner leaked, and coated the form instead.

Garage Floors

Project page →

Do I need both the membrane and the sealer?

On a garage floor, yes. The membrane waterproofs the slab and flexes with it; the sealer takes the traffic. The membrane on its own is rated for light foot traffic, which a garage is not.

Can I park on it?

Once both layers are fully cured. Seal about 2 days after the last coat of membrane. The membrane needs its full 7-day minimum cure — longer with thick coats or high humidity — and the sealer needs its own cure too. A tire on an uncured floor leaves a permanent mark.

What about oil stains?

Degrease them before you do anything else. Prep D lifts mineral deposits and efflorescence, not oil — and nothing bonds to a slab that still has oil in it.

How is this different from an epoxy kit?

Epoxy is one rigid layer doing two jobs. It’s hard enough for traffic but too brittle to move with the slab, which is why it lifts at the edges. This splits the job: a flexible waterproof layer underneath, a wear layer on top.

Will it stop my floor dusting?

Yes — sealing the surface is what stops the powdering. One customer used it specifically to slow the deterioration on a dusting cement garage floor.

My garage is below grade and damp. Can I do the walls too?

Yes, same product and same Prep D. Choose “floor & walls” in the coverage calculator on the Garage Floors page and it sizes both. Walls need no sealer over the top — only the floor does.

Will it be slippery?

A gloss floor can be when wet, which is why Non-Skid Additive is ticked by default in the Garage Floors page calculator. It mixes into the sealer before you roll, so it has to be decided at the time.

Will it be slippery when wet?

Not with Non-Skid Additive, which is why it’s ticked by default in the Pool Decks page calculator. It mixes into the sealer before you roll, so it has to go in at the time — it can’t be added later. Matte also reads less slick than gloss around a pool.

Will it make the deck cooler?

A lighter color will. White tests at SRI 64 under ASTM E1980 against roughly 20 for weathered dark concrete, so it reflects far more solar heat. One owner reported his deck no longer feels as hot barefoot in summer after sealing it.

Do I need the membrane, or just a sealer?

If the deck is sound and you only want protection and color, the sealer alone will do a lot. The membrane underneath is what actually waterproofs the slab against splash-out and freeze-thaw — worth it on an older deck, or anywhere that freezes.

What about the coping?

Same system. A customer coated worn bare coping around an in-ground pool and said it made the pool look new. Add the coping area in the coverage calculator on the Pool Decks page.

Will pool chemicals affect it?

Normal splash-out is fine. What to avoid is concentration — don’t let undissolved tablets or granules sit on the deck surface, as a high local concentration can discolor the finish in that spot.

Can I do pavers or flagstone?

Yes. Pavers, brick and flagstone all work, and one customer used Titan Shield on pavers for a children’s play area. Textured surfaces use noticeably more material than their footprint suggests.

How long before we can use the pool again?

Seal about 2 days after the last coat of membrane, then let everything cure — the membrane needs 7 days minimum, longer with thick coats or humidity, and the sealer needs its own cure. Plan the job for a stretch you’re not using the pool.

Retaining Walls

Project page →

Should I coat the soil side or the face I can see?

The buried side is better if you can reach it — it stops water before it enters the block. But most people can’t excavate, and coating the exposed face works: customers have sealed block walls from the accessible side and reported no leaks months later, with one calling an exterior repair near impossible.

Will it stop the white deposits coming back?

Yes, once the surface is sealed the salts have no route out. Clear the existing efflorescence with Nu-Lift first — coating over it means bonding to a layer that’s already letting go.

Can I use it on landscape timbers?

Yes, with Prep E — sand with 60-grit, no cleaner. Bare timber drinks the first coat, so plan on three coats and roughly 100 sq ft per gallon rather than 200.

What about a planter or a stormwater box?

Treat it as submerged: three coats. Customers have lined concrete planters and stripped-back timber boxes with it, including one that was leaking through failed TPO.

Does it still need a drain behind the wall?

Sealing reduces what comes through, but a retaining wall should still have drainage. If yours has none and the soil stays saturated, add a drain at the base while you have the wall exposed.

Is it safe next to planting?

It’s water-based and low-VOC at 14 g/L, and cures to an inert film. Let it cure fully before soil or water goes back against it.

My wall is leaning. Will this help?

No. Leaning, bulging or displaced block is a structural problem — the wall needs rebuilding or proper drainage first. A coating seals a surface; it can’t hold back soil.

Roof Waterproofing

Project page →

I can’t find the leak. Will this still work?

That’s the main reason people use it. Because you coat the whole surface rather than a suspected spot, you don’t need to locate the entry point — and you can skip the two-person hose test entirely.

Can I apply it over my existing roof?

Yes, on EPDM and rubber, asphalt shingle, torch-down and bitumen, metal, concrete roof decks, gutters and valleys, or plywood and timber decking, provided it’s cleaned with the right pair first and the existing surface is sound. What it can’t do is fix rotted decking or structural failure.

My metal roof is corrugated. Does that change anything?

Yes. Corrugated profile has meaningfully more actual surface than its flat footprint, so plan on roughly 25% more material. Tick the corrugated box in the coverage calculator on the Roof Waterproofing page and it adjusts for you.

My roof already has a coating on it.

In the Roof Waterproofing page calculator, choose “already coated, chemistry unknown” and you’ll get Prep C — Power Cleaner then Nu-Lift, designed for non water-based or unknown coatings. The exception is silicone, where adhesion can be unreliable; test a small area first.

Do I really need the fabric?

On seams, laps, edges, fasteners and penetrations, yes. That’s where roofs leak. It’s pre-ticked in the Roof Waterproofing page calculator for that reason.

Does the color matter?

For heat, yes. White tests at SRI 64 under ASTM E1980, against roughly 20 for a typical black asphalt roof — so a white roof reflects considerably more solar heat into the sky rather than into the building.

Will it stop water that’s already coming in?

It has to go on a dry surface, so you can’t coat during active leaking. Wait for a dry spell, clean, coat, and give it the cure window.

Will it seal metal roof seams and fastener heads?

Yes — those are the two places metal roofs let go. Clean with Prep D (Nu-Lift, then Stone Soap), which also etches the metal so the membrane bonds. Press Fabric Reinforcement into the first wet coat over seams, laps and fastener lines, then roll two coats over the whole roof. Apply on a dry day, never during an active leak.

Do I need to prime a rusty metal roof?

No primer, ever — prep does that job. Scrape or wire-brush loose and flaking rust back to sound metal, then use Prep D: Nu-Lift etches the metal and lifts oxidation, and Stone Soap removes the residue. Let it dry fully before coating. Metal rusted through needs patching or replacing first.

Roof cement or caulk vs a full coating — which lasts longer?

Caulk and roof cement are spot fixes, and they harden and crack at exactly the joints that move. A flexible membrane over the whole roof keeps moving with it, and because it covers everything you don’t have to find the leak first.

Does the warranty actually cover a vehicle?

Yes. The 5-year warranty covers mobile applications, so it holds on a roof that travels at highway speed. Most coatings sold for RVs quote one to three years of expected life and don’t warrant vehicle use at all.

Do I need a primer for EPDM or TPO?

No. No primer for any of the four roof types. What you do need is the correct cleaning — the calculator on the RV page picks the right pair from your roof type and whether it’s been coated before.

How do I know what my roof is made of?

Wipe it with a damp white rag. Chalky white residue means EPDM. Clean rag and a smoother surface is likely TPO. A hard, rigid one-piece surface is fiberglass. Metal is obvious. If you’re unsure, answer “yes or I don’t know” to the coating question in the RV page calculator — that routes you to the heavy-duty prep, which is the safe answer.

How often will I need to redo it?

Only when it needs it. There’s no annual reapplication built in, which is the main difference from lap sealant — that needs inspecting and topping up every year or two by design.

How much do I need?

Enter your rig’s length in the RV page calculator and it works out the roof area at a typical 8 ft width, then sizes it at 200 sq ft per gallon over two coats. A gallon covers a small trailer roof. A badly weathered roof may take a third coat, so size up if you’re between.

Can I walk on the roof afterwards?

Once fully cured, yes, for maintenance access. Dry to touch in about an hour, initial cure at least 7 days.

My ceiling already has a soft spot. Will this fix it?

No — and this is the honest answer. A soft spot means water has reached the structure, and a coating seals surfaces rather than rebuilding them. Get the damage repaired, then coat the roof to stop it happening again.

Do I have to strip my old RV roof first?

No. Coat over the existing EPDM, TPO, fiberglass or metal as long as it’s sound. Original, never-coated roofs get Prep B (Power Cleaner, then Stone Soap). If it’s been coated before, or you’re not sure, use Prep C (Power Cleaner, then Nu-Lift) and remove anything loose or flaking.

How do I handle the A/C unit, vents and skylights?

Brush around them first, and press Fabric Reinforcement into the first wet coat over every vent, fan, A/C flange, skylight and the front and rear cap joints. Those are the high-movement spots where RV roofs leak. Then roll the field coats over the top.

Shower Waterproofing

Project page →

Is this a primary waterproofing layer, or does it go over something else?

Primary. It’s certified to DIN EN 14891:2017-05, the standard for liquid-applied waterproofing beneath bonded ceramic tile. No separate pan liner or sheet membrane underneath — you coat the enclosure and tile onto it.

Can I tile directly onto it?

Yes, with standard thinset once it’s dry. Several customers tiled the next day, and one described mortar bonding to it as if it were concrete.

How is it different from a sheet membrane system?

Mainly that you can see it. With sheet systems the seams are bedded in thinset and hidden, so you find out later. A liquid membrane lets you inspect the surface under a light, find a thin spot and fix it before a tile goes on.

Does it smell? It’s an enclosed bathroom.

It’s water-based at 14 g/L VOC. The comparison people keep drawing is with the odor of the red roll-on products — an open window is enough here.

Can I go over my existing tile?

Yes, if the tile is sound. Clean it thoroughly first with Nu-Lift and Stone Soap to remove soap residue, water deposits and mold. One customer did exactly that on dated bathroom wall tile.

What about the shower pan and the curb?

Same system. Get the slope right first, reinforce the wall-to-pan junction, the curb and around the drain flange with fabric, then coat. Customers have coated sloped plywood pans and mud decks alike.

How much will I need?

About 200 sq ft per gallon at two coats on backer board. Bare wood takes three coats and roughly half that. A standard 3 × 5 ft shower is around 110 sq ft including the pan — the coverage calculator on the Shower Waterproofing page works it out.

Will the pan be slippery?

A customer who worried about exactly that reported it wasn’t. In any case a shower pan is normally tiled over, so the membrane isn’t the walking surface.

Do I still need a waterproofing membrane if I used cement board?

Yes. Cement board tolerates water but doesn’t stop it — moisture passes straight through to the wall behind. The membrane over the board and its seams is what keeps water out. Embed Fabric Reinforcement on every board joint and the floor-to-wall joint before you coat.

How do I avoid pinholes and thin spots?

Apply at least two thin, even coats, rolling each in a different direction, and let the first hold no fingerprint before the second goes on. Then check the whole enclosure under a bright light before any tile goes on — a pinhole is a leak, and it’s a two-minute fix while you can still see it.

When can I flood-test the shower?

After the full cure: 7 days minimum, longer in cool or humid weather. Tiling can happen once it’s dry, but standing water has to wait for the cure.

How does it compare to RedGard?

Both are liquid membranes that go under tile. SEMCO is certified to DIN EN 14891 as primary waterproofing beneath tile, has up to 1,300% elongation, and isn’t limited to showers — the same product does pools, decks, roofs and below-grade walls.

Can I waterproof over drywall in a shower?

Use cement or backer board in any wet area rather than drywall, then coat the board. Standard and moisture-resistant (green) drywall aren’t made for a wet enclosure, and anything already water-damaged should come out before you start.

Swimming Pool Waterproofing

Project page →

Will chlorine damage it?

At normal pool chemistry, no. What can cause a problem is concentration — heavy shocking, free chlorine allowed to run high, or undissolved tablets and granules sitting directly on the surface. That can bleach or discolor the coating in that spot, and it isn’t reversible. Dose through the skimmer or a floater and keep chlorine and pH in their normal ranges.

Why does it need Color Activator?

Submerged color behaves differently from color on a wall. The Activator is mixed into the membrane before you roll it, one container per container of membrane, matched to the same size and color. The coverage calculator on the Swimming Pool Waterproofing page adds it automatically.

How many coats, and how much?

Three coats, each at 15 to 20 mil. Coverage is about 100 sq ft per gallon at three coats, rather than the 200 you’d get on a wall. A typical 16 × 32 ft pool is around 1,000 sq ft of wetted area.

How long before I can fill it?

At least 7 days, and longer if the coats went on thick or the weather is humid. Filling early is the most common way this job fails.

Can I coat over old plaster?

Over sound plaster, yes — that’s one of its better uses, since it avoids a full replaster. Remove anything chalking or delaminating first; the membrane bonds to what’s solid, not to plaster that’s already letting go.

What about a fiberglass shell?

Sand the whole surface with 60-grit first, then Prep B. Chalky gelcoat needs taking back before you coat.

My shell has a structural crack. Will this fix it?

No. Structural cracking, shell movement or a failed bond beam all need proper repair first. This seals a sound surface — it can’t hold one together. It also isn’t for vinyl-liner pools.

How do I seal and protect a concrete walkway?

Clean the walkway with SEMCO cleaners and apply a penetrating sealer like Natural Shield, or a film-forming sealer such as Titan Shield Gloss for added protection.

Can I add color to a walkway?

Yes. Use SEMCO PreStain Color to add durable, water-based color before sealing the walkway.

Can I make the walkway slip-resistant?

Yes. Adding the Non-Skid Additive to the sealer improves traction on walkways that get wet.

Wood Decks & Balcony

Project page →

How much will I actually need?

On bare wood, plan on roughly 100 sq ft per gallon at three coats — about half what a sealed surface gives, because timber absorbs the first coat. The coverage calculator on the Wood Decks & Balcony page uses that figure by default. If your deck has a sound existing coating, it goes further.

Do I have to sand off the old stain?

Yes. The membrane bonds to bare timber, not to a stain that’s already letting go. 60-grit, and take it all off — this is the step that decides whether the job lasts.

Will it be slippery when wet?

A sealed deck can be, which is why Non-Skid Additive is ticked by default in the Wood Decks & Balcony page calculator. It mixes into the sealer before you roll, so it has to go in at the time — it can’t be added later.

Can I put my furniture back?

Not until it’s fully cured. Seal about 2 days after the last coat of membrane, then give the membrane its full 7-day minimum cure — longer with thick coats or high humidity — before furniture or foot traffic. A customer’s own advice: this is not paint, give it the time.

What about the gaps between boards?

Coat the edges and end grain as you go — that’s where water gets into a board. Fabric Reinforcement at board joints and at the wall junction is worth the extra hour.

Will it look like plastic?

It encapsulates the boards rather than staining them, so it reads as an even colored surface rather than visible grain. One customer chose it specifically to make pine look closer to composite decking.

How long does the whole job take?

Longer than a weekend if you do it properly. Sand, three coats of membrane, wait about 2 days, then three coats of sealer — and let it all cure. One customer spread it over two months around rain and family — and got the cure right as a result.

Can it waterproof plywood or OSB, including the edges?

Yes. Sand with 60-grit (Prep E), then coat every face you can reach — especially the edges and end grain, which drink water first and swell. Bare wood takes three coats at roughly 100 sq ft per gallon. Fabric Reinforcement goes over sheet joints.

Will the wood rot if moisture is trapped under the coating?

Not if you start dry. Coat only wood that is fully dry, and seal the exposed edges so water can’t get in from an uncoated side. Don’t coat over sheathing that is already wet or soft — dry it out or replace it first.